基于SVM的固化土无侧限抗压强度模型

为实现较少试验次数下固化土无侧限抗压强度(qu)的准确预测, 提出了基于支持向量机(SVM)的固化土qu的预测模型. 以固化剂各组分掺入比、龄期、初始含水量、固化剂掺量等因素为输入量, 固化土的qu作为输出量, 以径向基为核函数, 采用网格搜索法和交叉验证法进行参数优化, 建立了基于SVM的固化土qu的预测模型. 算例分析表明: 该模型适用于任意条件下固化土qu的精确预测, 且在较小试验成本下实现与响应面法相当的预测精度.     

波形钢板-UHPC组合桥面板结构截面优化

对实腹式波形顶板-UHPC(超高性能混凝土)组合桥面板进行了改进, 采用空腹式结构建立波形钢板-UHPC组合桥面板有限元模型, 研究UHPC层厚度、波形钢板厚度、波形长度、下缘板宽度和波形高度等截面参数变化对组合桥面板受力特性的影响, 并确定其合理取值范围. 在此基础上, 通过理想点法对参数组合进行优化, 得到合理的参数匹配. 研究结果表明 相较于实腹式组合桥面板, 优化后的组合桥面板自重减小35%, 钢板弯折处应力减小16%; 相较于正交异性钢桥面板, 桥面板用钢量减小7%, 顶板与U肋连接位置应力减小47%.     

Rare-earth metal derivatives supported by aminophenoxy ligand: Synthesis,characterization and catalytic performance in lactide polymerization

A library of rare-earth metal derivatives supported by an aminophenoxy ligand was prepared and their catalytic performance in lactide polymerization was investigated. It was found that the synthetic strategy had a profound effect on the formation of aminophenoxy rare-earth metal complexes. Amine elimination between Ln[N(SiMe₃)₂]₃(μ-Cl)Li(THF)₃ (Ln = Yb, Y) and 1 equiv. of the aminophenol [HONH] ([HONH] = ο-OCH₃-C₆H₄NHCH₂(3,5-^tBu₂-C₆H₂-2-OH)) in toluene gave the unexpected heterobimetallic bis(aminophenoxy) rare-earth metal complexes [ON]₂LnLi(THF)₂ (Ln = Yb ( 1 ), Y ( 2 )). When the reactions were carried out in THF and TMEDA, amine elimination produced the aminophenoxy rare-earth metal amide complexes {[ON]LnN(SiMe₃)₂}₂ (Ln = Yb ( 5 ), Y ( 6 )) in ca 85% isolated yields. Complexes 5 and 6 could also be obtained from salt metathesis reaction of {[ON]LnCl(THF)}₂ (Ln = Yb ( 3 ), Y ( 4 )) with NaN(SiMe₃)₂ in a 1:2 molar ratio. In addition, treatment of complexes 3 and 4 with NaOAr (Ar = &bond;C₆H₄-4-^tBu) and (SiMe₃)₂NC(NPrⁱ)₂Na in 1:4 and 1:2 molar ratios provided the corresponding aminophenoxy rare-earth metal derivatives {[ON](μ-OAr)Ln(μ-OAr)Na(THF)₂}₂ (Ln = Yb ( 7 ), Y ( 8 )) and {[ON]Ln[(ⁱPrN)₂CN(SiMe₃)₂]}₂ (Ln = Yb ( 9 ), Y ( 10 )), respectively. These complexes were fully characterized, and their molecular structures were determined using single-crystal X-ray diffraction. Polymerization experiments showed that complexes 1 , 2 , 5 , 6 , 9 and 10 were highly active for the ring-opening polymerization of l -lactide in toluene, and complex 1 promoted l -lactide polymerization in a controlled fashion. The polymerization of rac-lactide initiated by the neutral aminophenoxy rare-earth metal complexes 5 , 6 , 9 and 10 in THF afforded heterotactic polymers.     

Facile amidation of esters with aromatic amines promoted by lanthanide tris (amide) complexes

The development of catalysts capable of catalyzing amidation of esters with amines to construct amides under mild conditions is of great importance. Compared to aliphatic amines, the direct catalytic amidation of esters with less nucleophilic aromatic amines is rather difficult. Employing simple lanthanide tris (amide) complexes Ln[N (SiMe₃)₂]₃(μ-Cl)Li (THF)₃ as the catalysts, it was found a broad range of aromatic amines and esters were efficiently converted into various amides in good yields under mild conditions. A plausible mechanism for this transformation was experimentally supported as starting from an amide exchange reaction between the lanthanide tris (amide) complex and the substrate amine.     

Maximum cross-correlated kurtosis-based unsaturated stochastic resonance and its application to bearing fault diagnosis

Considering the random impulses of mechanical noise and the limitations involved while identifying mechanical fault impulse signals via traditional measurement indices of signal-to-noise ratio, which require the characteristic frequency to be known in advance, this study proposes an adaptive unsaturated stochastic resonance method employing maximum cross-correlated kurtosis as the signal detection index. The proposed method combines the features of a cross-correlated coefficient to indicate periodic fault transients and those of spectrum kurtosis to locate these transients in the frequency domain. Actual vibration signals collected from motor and gear bearings subjected to heavy noise are used to demonstrate the effectiveness of the proposed method. Through a coarse tree-based machine learning method, the proposed method is verified to be more suitable for explaining the periodic impulse components of bearing signals, as compared to the ensemble empirical mode decomposition denoising method and unsaturated stochastic resonance using the kurtosis-intercorrelation index.     

Precise analysis of thyroxine enantiomers in pharmaceutical formulation by mobility difference based on cyclodextrin

Identification and determination of chiral pharmaceutical residues is still a challenging analytical puzzle. In this work, a simple, rapid, and effective method for chiral D/L-tetraiodothyronine (T4) separation and quantitative was developed based on host–guest recognition using ion mobility spectrometry-mass spectrometry (IMS-MS). The D/L-T4 enantiomers were mobility separated by their diastereomeric complexes through mixing with cyclodextrin (CD) and metal ions. D/L-T4 was first separated by complexing with host molecule (α-, β-, γ-CD), observing weak peak-to-peak resolution (R_p-p) by the formed binary complex [CD + D/L-T4-H]⁺, and the R_p-p decreased with the CD size increasing. However, the separation effect of D/L-T4 was much improved with the addition of divalent metal ions (G²⁺) by the formed ternary complex [CD + D/L-T4 + G]²⁺. In comparison, α-CD related complexes can possess the best separation effect for D/L-T4 in most cases. Considering the high selectivity, non-toxic, and chemically stable of β-CD, [β-CD + D/L-T4 + Ca]²⁺ was selected for D/L-T4 analysis (R_P-P = 0.764). Whereafter, chemical theoretical conformations for [β-CD + D/L-T4 + H]⁺ and [β-CD + D/L-T4 + Ca]²⁺ were optimized, discovering similar micro-interaction modes between [β-CD + D-T4 + H]⁺ and [β-CD + L-T4 + H]⁺; while with the addition of Ca²⁺, significantly different interaction modes were observed between [β-CD + D-T4 + Ca]²⁺ and [β-CD + L-T4 + Ca]²⁺. And theoretical collision cross section (CCS) trends for the complexes were consistent with that of the experimental results. Additionally, calibration curves were linear within 1.00 to 10⁴ ng mL^?1 with coefficient (R² > 0.99), gaining the limit of detection (LODs) calculation of 0.11 ng mL^?1, and the detection range between D-T4 and L-T4 of 45.6:1 to 1:59.8. Finally, the method was applied for D/L-T4 detection in Levothyroxine tablets, the detection content has good consistency on drug labeling. Because the proposed method exhibited good analytical performance in terms of speed, selectivity, sensitivity, and reproducibility of the measurements, that can be a promising strategy for effective D/L-T4 detection in pharmaceutical industries or other practical samples.     

两种磺胺喹噁啉锌(Ⅱ)配合物的合成、晶体结构和荧光性质(英文)

以磺胺喹噁啉为配体合成了2种锌的配合物[Zn(L)2(phen)]·H2O(1)和{[Zn(L)2(bpy)]·2Et OH}n(2)(L=磺胺喹噁啉,phen=菲咯啉,bpy=4,4′-联吡啶)并对其进行了单晶X-射线衍射,粉末X-射线衍射,热重,元素分析,红外光谱,紫外光谱和荧光光谱测定。单晶X-射线分析表明化合物1是单核结构,属单斜晶系,P21/c空间群。化合物2是一维结构,属单斜晶系,C2/c空间群。热分析表明化合物1和2都有很高的热稳定性。     

Investigating S-wave bound states composed of two pseudoscalar mesons

In this study, we systematically investigated two-pseudoscalar meson systems with the Bethe-Salpeter equation in the ladder and instantaneous approximations. By solving the Bethe-Salpeter equation numerically with the kernel containing the one-particle exchange diagrams, we found that the \begin{document}$ K\bar{K} $\end{document}, \begin{document}$ DK $\end{document}, \begin{document}$ B\bar{K} $\end{document}, \begin{document}$ D\bar{D} $\end{document}, \begin{document}$ B\bar{B} $\end{document}, \begin{document}$ BD $\end{document}, \begin{document}$ D\bar{K} $\end{document}, \begin{document}$ BK $\end{document}, and \begin{document}$ B\bar{D} $\end{document} systems with \begin{document}$ I=0 $\end{document} can exist as bound states. We also studied the contributions from heavy meson (\begin{document}$ J/\psi $\end{document} and \begin{document}$\Upsilon $\end{document}) exchanges and found that the contributions from heavy meson exchanges cannot be ignored.     

Design of a coated thinly clad chalcogenide long-period fiber grating refractive index sensor based on dual-peak resonance near the phase matching turning point

A novel method for designing chalcogenide long-period fiber grating (LPFG) sensors based on the dual-peak resonance effect of the LPFG near the phase matching turning point (PMTP) is presented. Refractive index sensing in a high-refractive-index chalcogenide fiber is achieved with a coated thinly clad film. The dual-peak resonant characteristics near the PMTP and the refractive index sensing properties of the LPFG are analyzed first by the phase-matching condition of the LPFG. The effects of film parameters and cladding radius on the sensitivity of refractive index sensing are further discussed. The sensor is optimized by selecting the appropriate film parameters and cladding radius. Simulation results show that the ambient refractive index sensitivity of a dual-peak coated thinly clad chalcogenide LPFG at the PMTP can be 2400 nm/RIU, which is significantly higher than that of non-optimized gratings. It has great application potential in the field of chemical sensing and biosensors.